Diy Full Size Platform Bed With Storage Plans

Creating a Full-Size Platform Bed with Storage: A Comprehensive Guide for Diy Enthusiasts

Building a full-size platform bed with storage is an excellent project for DIY enthusiasts who want to create a practical and stylish piece of furniture for their bedroom. By following these detailed plans, you can construct a sturdy and functional bed that will provide ample storage space and a comfortable sleeping surface.

Materials Required:

2x6 lumber: 10 pieces, each 8 feet long
2x4 lumber: 5 pieces, each 8 feet long
4x4 lumber: 4 pieces, each 1 foot long
Plywood: 1 sheet, 3/4-inch thick, 4 feet wide, and 8 feet long
Wood screws: 2-inch and 3-inch
Wood glue
Corner clamps
Drill and driver
Circular saw
Level

Step-by-Step Instructions:

1. Constructing the Bed Frame: * Cut the 2x6 lumber into the following lengths: * 2 pieces, 76 inches long (headboard and footboard) * 4 pieces, 80 inches long (side rails) * Assemble the headboard and footboard by joining the 2x6 pieces with 3-inch wood screws. * Attach the side rails to the headboard and footboard using 2-inch wood screws. * Check the frame for squareness using a level. 2. Creating the Storage Drawers: * Cut the plywood into 4 pieces, each measuring 19 inches wide and 38 inches long. * Build the drawers by attaching the plywood sides to 2x4 lumber for the bottom and top frames. * Install drawer slides on the inside of the bed frame and attach the drawers to the slides. 3. Assembling the Platform: * Cut the remaining 2x4 lumber into 10 pieces, each 80 inches long. * Place the 2x4 pieces across the bed frame, spacing them evenly. * Attach the plywood to the 2x4 pieces using wood screws and wood glue. 4. Installing the Headboard and Footboard: * Attach the headboard to the bed frame using 3-inch wood screws. * Secure the footboard to the bed frame in the same way. 5. Reinforcing the Frame: * Cut the 4x4 lumber into 4 pieces, each 1 foot long. * Place the 4x4 pieces inside the corners of the bed frame and secure them with wood screws. * This will provide additional strength and stability to the frame. 6. Finishing Touches: * Sand the bed frame and plywood to remove any splinters or rough edges. * Stain or paint the bed to match your desired style. * Add a mattress and enjoy your new custom-made full-size platform bed with storage!